Thursday, June 30, 2011

STEMAT SPIRIT

Stemat SpiritThe Stemat Spirit (IMO: 9496458, Port of Registry: Rotterdam) is a special service workboat of 90 meters length and 28 meters wide. She has an open deck space of 1,500 sq.m. with a deck strength of 15 ton / sq.m. The Stemat Spirit is propelled by two Caterpillar 3512HD engines and is equipped with two azimuth stern thrusters of 1140 kW, two caterpillar bow thrusters and two azimuth retractable bow thrusters of 1118 kW. The vessel provides accomodation to a crew of 60.

The Stemat Spirit arrived last night at the Stemat berth in the Werkhaven, Rotterdam.

Click here for the current position of the Stemat Spirit

Wednesday, June 29, 2011

CMA CGM AMERIGO VESPUCCI

CMA CGM Amerigo VespucciToday's Ship of the Day is the CMA CGM Amerigo Vespucci (IMO: 9454395, Port of Registry: Marseille, France). The Amerigo Vespucci is currently the largest vessel in CMA CGM's fleet with a maximum teu capacity of 13,344. The vessel is 365 meters long and 51 meters wide. She was built in 2009 by Daewoo Heavy Industries, Korea. The vessel's design is comparable to the recently built MSC vessels (such as: MSC Beatrice) with the superstructure located midships. One can argue about the looks of this vessel, however the design ensures for better stability and lower trim for higher speed, when the ship is fully loaded. In compliance with CMA CGM’s environmental policy and like all new vessels of this type ordered by the Group, the CMA CGM Amerigo Vespucci is equipped with a combination of innovative environmental features, including:

- An electronically controlled engine, reducing oil and fuel consumption thus enabling the vessel to be operated at eco-speed,
- Double-hull protected bunker tanks, in compliance with the MARPOL 12A regulation which will come into effect in August 2010
- The Fast Oil Recovery System, which enables bunkers to be rapidly recovered at any time, hence significantly limiting the environmental consequences should there be an incident at sea.

The Amerigo Vespucci will have seven sisterships, amongst which are the CMA CGM Christoph Colomb and CMA CGM Corte Real which have also been recently delivered. She is deployed in CMA CGM's FAL5 loop connecting China and North-Western Europe.

The CMA CGM Amerigo Vespucci is scheduled to arrive this morning at the APM Terminal, Rotterdam with the last port of call at Le Havre.

Click here for the current position of the CMA CGM Amerigo Vespucci

Monday, June 27, 2011

MAERSK ESSEN

The Maersk Essen (IMO: 9456783, Port of Registry: Majuro, Marshall Islands) is Maersk's answer to the new breed of containervessels, introduced by MSC, with the superstructure midships. The Maersk Essen was the first of nine newbuildings in this class, amongst which are the Maersk Edinburgh, Maersk Edmonton and Maersk Eindhoven. The vessel is 366 meters long and 48 meters wide and has a deadweight of 141,000 tonnes. She has a maximum capacity of 13,092 teu and is propelled by a Hyundai-Wärtsilä 12RT-flex 96C engine delivering a maximum power of 68,640 kW. The vessels are deployed in Maersk's AE-7 and AE-8 loop where they will replace the VLCS ships. The vessels are crucial in Maersk's strategy to maintain and expand market share. Rumours are that Maersk is also considering 18,000 teu vessels to be built in the following years.

The Maersk Essen is scheduled to arrive this afternoon at the APM Terminal, Rotterdam from Hamburg.
Maersk Essen
Source: Shipspotting.com
Copyright: Jens Boldt


Click here for the current position of the Maersk Essen

Thursday, June 23, 2011

CMA CGM ANDROMEDA

CMA CGM AndromedaThe CMA CGM Andromeda (IMO: 9410727, Port of Registry: London) is one of the more recent additions to the fleet of CMA CGM. The vessel was built at Hyundai Heavy Industries and delivered early 2009. She has a maximum teu capacity of 11,356 TEU and 800 connections for reefers. The CMA CGM Andromeda is 363 meters long and 45 meters wide and has a deadweight tonnage of 128,550. According to CMA CGM the vessel uses 6% less fuel than comparable ships. The CMA CGM Andromeda is propelled by a MAN B&W main engine with an output of 72,240 kilowatts, making it possible for the ship to travel at a service speed approaching 25 knots. CMA CGM has deployed the vessel in her FAL1 loop between Asia and Europe.

The CMA CGM Andromeda is scheduled to arrive later tonight from Hamburg at the ECT Delta Terminal. She will depart within 24 hours.

Click here for the current position of the CMA CGM Andromeda

Wednesday, June 08, 2011

OOSTERSCHELDE

The three-masted topsail schooner 'Oosterschelde' (IMO: 5347221, Port of Registry: Rotterdam) is the last remaining representative of the large fleet of schooners that sailed under the Dutch flag at the beginning of the 20th century. As the largest restored Dutch sailing ship the 'Oosterschelde' is a monument for Dutch shipbuilding and maritime navigation under sail. The vessel was built in the Netherlands in 1918 at the order of the Rotterdam shipping company H.A.A.S. As a freighter the ship could carry some hundred tons of cargo. The vessel was restored between 1990 and 1992 and since then it has made a voyage around the world and several other long voyages. Next to these voyages the vessel is also available for chartering.

The vessel is 50 metres long, 7.5 meters wide and has a mast heigth from the keel of 36 metres. She has a sail area of 891 square metres and is also equipped with a 6 cylinder Deutz, 360 pk engine.

Photo by: Pieter Nijdeken
The Oosterschelde has a maximum capacity of 120 passengers for daytrips (at sea: 36) and 24 on longer voyages. The accomodation exists of 8 two-person cabins and 2 four-person cabins. One board are 5 toilets and two showers.

The Oosterschelde arrived this evening at the Veerhaven, Rotterdam returning after a trip to Bretagne, France.

More information can be found at: www.oosterschelde.nl

Sunday, June 05, 2011

COMBI DOCK 1

Combi Dock IToday we have the heavy lift cargo ship Combi Dock I (IMO: 9400473, Port of Registry: St. John's, Antigua & Barbuda) featuring as the Ship of the Day. The Combi Dock I is 162 meters long, 25 meters wide and was delivered in January 2008. The vessel is able to transport heavy lift
offshore objects loading/discharging the cargo by floating the objects with a maximum draft of 4.5 mtrs onto and off the large free cargo deck, having a size of 132,60 m x 25,40 meters,. She is equipped with 3 heavy lift cranes, 2 with a capacity of a SWL 350 t each and 1 with a SWL of 200 t, delivering a total lifting capacity with 2 in tandem 700 t. The Ship was built at Lloyd Werft, Bremerhaven and is currently operated by Combilift, Denmark.

The Combi Dock I arrived this morning at the Waalhaven, Rotterdam.

Click here for the current position of the Combi Dock 1

Thursday, June 02, 2011

MS ROTTERDAM

MS RotterdamToday's Ship of the Day is the ms Rotterdam (IMO: 9122552, Port of registry: Rotterdam), the flagship of the Holland America Line which has a capacity of 1,316 passengers. She is already the sixth ship of the HAL to bear the name. The Rotterdam has 658 rooms of which there are 4 penthouse suites, 36 normal suites, 120 mini suites, 381 outside staterooms and 117 inside staterooms. Furthermore there are several restaurants, bars, a theather, a kids club, a library, a casino and a health spa on board. This in 1997 in Italy built vessel is 238 meters long, 32 meters wide and has a gross tonnage of almost 60.000. The ms Rotterdam has arrived last night at the Holland Amerikakade from Zeebrugge and has already departed the port of Rotterdam earlier this evening with destination Copenhagen.

Pictures below are of the penthouse, the art gallery and the atrium.

Rotterdam PenthouseRotterdam Atrium

Rotterdam Art Gallery

Click here for the current position of the MS Rotterdam

Wednesday, June 01, 2011

BERGE STAHL

Berge Stahl
The Berge Stahl seen moored at Ponta da Madeira, Brasil.
Today's SOTD is the Berge Stahl (IMO:8420804, Port of registry: Stavanger, Norway) which is the largest ore carrier currently sailing with her deadweight of 364,767 tons. The vessel is owned by Bergesen Worldwide Shipping and was built in 1992 by Hyundai Heavy Ind. Co. Ltd. Ulsan, Korea. She is 343 meters long, 65 meters wide, has a draught of 23 meters and has 7 holds and hatches. She transports iron ore from the 'Companhia Vale do Rio Doce' mines in the eastern part of the Amazone, Brasil to Rotterdam about 9 or 10 times a year. From Rotterdam the iron ore is transported in barges to the steel mills of ThyssenKrupp and Hüttenwerke Krupp Mannesmann in Germany.

The Berge Stahl is scheduled to arrive this afternoon at the EECV terminal, Rotterdam from Ponta da Madeira, Brasil.


Click here for the current position of the Berge Stahl

Popular Posts

Gadget

This content is not yet available over encrypted connections.

Enter your email address to receive all posts by mail:

Delivered by FeedBurner

Contact